Home >> Products >> Matrix and Arrays
- Product name:
GAGG(ce) Array
Product Description
Main GAGG array design parameters:
Pixel size: The X and Y dimensions of each GAGG pixel
Separator/reflector type and thickness: The type of reflector between the GAGG pixel and its overall thickness(Gap, G)
Pitch: The distance between the center of one element to the center of an adjacent element, X+G or Y+G
Radiation thickness: This is the Z dimension and specifies the thickness of the array in the direction of incoming radiation
Back reflector thickness: Usually a white reflector is applied to the radiation entrance side of the array to reflect the light
back into the pixel so it can be directed to the photodetector
| Separator/Reflector type and its standard | ||
| Material | Relatively reflectivity | Gap in the array |
| Barium Sulfate(BaSO4) | 100% | 0.08 mm min 0.10 mm in general or up |
| Titanium Dioxide(TiO2) | 100% | 0.10 mm min or up |
| Enhance Specular Reflector(ESR) | 96% | 0.08 mm in general |
