A PMT (Photomultiplier Tube) assembly is a component used in scintillation detectors to detect and measure ionizing radiation. PMTs consist of a photocathode, a series of dynodes, and an anode. When a photon strikes the photocathode, it releases electrons through the photoelectric effect.

EP series tube socket modules, according to the different configurations, can contain voltage dividers, preamplifiers, high voltage power supply and other functional modules, applicable to a variety of specifications of photomultiplier tubes and their composition of the scintillation probes. It can realize a variety of radioactive radiation measure

EGW3043 Tube Base Multi-Channel Analyzer is a tube base pulse height analyzer, including a 14-pin photomultiplier base, a built-in MCA with a resolution of 4096 channels and matching amplifiers, high-voltage power supplies, etc, which can work in a Single-Channel Analyzer (SCA) mode or Multi-Channel pulse height Analyzer (MCA) mode.

Integrated scintillation detectors generally contain a scintillator, photo multiplifier tube(PMT) and electronic modules. Due to its high detection efficiency, good energy resolution, stable signal output and suitable configuration design, they have been widely used in nuclear radiation detection, environment monitoring, density and level measureme

In some scintillation detectors, a photo diode assembly is used as the photo-detector. A photo diode is a semiconductor device that generates a current or voltage when illuminated by light. The photo diode assembly typically includes a photo diode, a housing or package to protect the diode, and electrical connections for the diode.

In addition to Photomultiplier Tube (PMT) assemblies, scintillation detectors can also utilize SiPM (Silicon Photomultiplier) assemblies. SiPMs are solid-state devices that can be used as an alternative to PMTs for light detection in scintillation detectors.

EGZ-SD65WH is a clear, colorless, silicone, optical coupling compound that features excellent light transmission and low evaporation and bleed at 25 degree C, and it has a specific gravity of 1.12 and 1.467 index of refraction. EGZ-SD65WH is for optical coupling of photosensors to scintillators and light guides, for example the coupling of photomul

PIPS-Passivated Implanted Planar Silicon detector is a product of modern semiconductor technology. It used ion implantation device to accelerate ions, after screening, focusing and re-acceleration, they are injected into silicon wafers.